Emmaljunge Ozone City Gebrauchsanweisung Seite 84

Assembly of the seat-unit
9
5
8
6
7
10
12
11
8
9
84
• To assemble the seat unit fabrics, open all of the zippers on the
seat-fabrics. Insert the wooden seat plate (see picture 4). Insert the
seat unit's aluminium frame into the fabric as shown in the picture
(8).
• The black plastic strap on the seat unit frame (9) should be placed
on the outside of the fabric.
8
• Secure the black plastic strap to the seat fabric with the aid of the
two Velcro straps in the fabrics.
• Check that all zips are attached, (five in total):
− For the wooden plate (picture 4)
− 1 pc under the seat (10)
− 1 pc under the footrest (11)
13
− 1 on each side of the seat along the black plastic Easy fix attach-
ment points (12 and 13).
WARNING
• Before you use the pram, make sure that the seat fabrics are cor-
rectly attached and that all zips are correctly fastened.
Assembly of the hood
• Press the two plastic legs of the hood into the plastic receivers on
the seat-unit (one on each side).
WARNING
• The hood should be assembled when the pram is in use.
• The hood should be attached with the poppers (7 pcs in total) as
shown on the picture.
WARNING
• Always make sure that the backrest of the unit is in a safe position
before it is used. This step is very IMPORTANT.
Manual Ozone City v. 1.2