RUSTA 901011690101 Gebrauchsanweisung Seite 6

ENG
.PRODUCT INSTRUCTION
INTERIOR WALLS
• Wipe clean the cavity with a dampened soft cloth.
• Wipe clean the waveguide cover to remove any food splashed.
.PRODUCT INSTRUCTION
TURNTABLE/ ROTATION RING/ ROTATION AXIS
②
• Wash with mild soap water. Rinse with clean water and allow drying thoroughly.
PRODUCT INSTRUCTION
1) Door lock
1. DOOR LOCK – Microwave oven door must be properly closed in order for it to operate.
Microwave oven door must be properly closed in order fo
2. WINDOW – Allows user to see the cooking status.
1) Door lock
operate.
3. ROTATING AXIS – The glass turntable sits on the axis; the motor
Microwave oven door must be properly closed in order fo
underneath it drives the turntable to rotate.
2) Window
operate.
4. ROTATING RING – The glass turntable sits on its wheels;
it supports the turntable and helps it to balance when rotating.
Allows user to see the cooking status.
5. TURNTABLE – The food sits on the turntable, its rotation during operation 2) Window
helps to cook food evenly.
3) Rotating axis Allows user to see the cooking status.
CAUTION! Place the rotating ring first.
CAUTION! Fit the turntable onto the rotating axis and make sure that
The glass turntable sits on the axis; the motor underne
3) Rotating axis
it is geared in properly.
drives the turntable to rotate.
6. CONTROL PANEL – See below details.
The glass turntable sits on the axis; the motor underne
7. WAVEGUIDE COVER – Located next to the wall of control panel.
drives the turntable to rotate.
4) Rotating ring
WARNING! – Never remove or use the microwave oven without the
waveguide cover. Replace if damaged.
The glass turntable sits on its wheels; it supports the tur
4) Rotating ring
and helps it to balance when rotating.
The glass turntable sits on its wheels; it supports the turn
OPERATION OF CONTROL PANEL
1. BEFORE COOKING
and helps it to balance when rotating.
5) Turntable
The LED flashes 3 times when plugged in to a power supply. Then it
flashes ":", prompting you to input the cooking menu and time.
5) Turntable
The food sits on the turntable, its rotation during ope
2. AUTO COOKING/ TIME.WEIGHT KNOB
The food sits on the turntable, its rotation during ope
You can increase or decrease cooking time, weight or select auto cooking
helps to cook food evenly.
menu during operation by turning the knob.
helps to cook food evenly.
3. PAUSE/CANCEL
At the initial or input stage: Press once to cancel input programs and
- Place the rotating ring first.
resume initial stage.
- Place the rotating ring first.
During cooking: Press once to stop oven operation, press twice to cancel cooking programs.
- Fit the turntable onto the rotating axis and make sure th
6
- Fit the turntable onto the rotating axis and make sure tha
⑤ ⑦
⑤ ⑦
②
2
③
①
④
3
③
1
①
4
④
..............................................
...............................................
5
7
7) Waveguide cover
Located next to the wall of control panel.
Never remove or use the microwave
⑥
waveguide cover. Replace if damaged.
6
⑥
.OPERATION OF CONTROL PANEL
1. BEFORE COOKING
The LED flashes 3 times when plugged in
Then it flashes ":", prompting you to input
Waveguide
Waveguide co
cover
Waveguide cov
Power Express
Express
Power
Defrost Pre-set/Clock
Defrost Pre-set/Clock
Pause/Cancel Start
Pause/Cancel Start
Auto Time
Auto Time
Cooking Weight
cooking weight