STEAMAX REULEAUX RX GEN3 Bedienungsanleitung Seite 53

STEAMAX RX GEN3 – USING THE DEVICE
Adjust the Preheat Function
When the device is powered on, press the power button and the right adjustment button simultaneously for two seconds to
enter the menu. Press the right adjustment button once more to enter the PREHEAT menu. Press the left button to select the
logo „ON" and the logo „OFF". Press the power button to switch between preheat wattage and preheat time. Press the right or
the left adjustment button to increase or decrease the parameter. Confirm your setting by pressing the power button.
Charging and Updating
Please note that you are using high-current 18650 cells with a constant discharge current of ≥ 25A. The micro USB port is located below the Setting
buttons. Carefully connect the device to a PC with internet access using the micro USB cable to charge or to update software.
We recommend that you charge 18650 batteries using an external charger because the charging process is optimized and much faster by doing so.
51
www.steamax.com