Buchi Rotavapor R-300 Bedienungsanleitung Seite 93

BÜCHI Labortechnik AG
Bedienungsanleitung Rotavapor® R-300
Glass assembly C. Cold trap, 500 cm
For distillations of low-boiling point solvents. No need of cooling
liquid, but e.g. dry ice. Content: 1 L receiving flask, ball joint clamp,
stopcock, feeding tubing.
Not inclusive: Evaporating flask, vapor duct, vacuum gasket, holder.
Glass assembly C. Cold trap, 500 cm
For distillations of low-boiling point solvents. No need of cooling
liquid, but e.g. dry ice. Application temperature: -70 to 40 °C. Content:
1 L receiving flask (P+G-LT), ball joint clamp, stopcock, feeding
tubing.
Not inclusive: Evaporating flask, vapor duct, vacuum gasket, holder.
Glass assembly CR. Cold trap reflux, 500 cm
For reflux distillations with distributor and shut-off valve as well as for
distillation of low-boiling point solvents. No need of cooling liquid, but
e.g. dry ice. Content: 1 L receiving flask, ball joint clamp, stopcock,
feeding tubing, distributor.
Not inclusive: Evaporating flask, vapor duct, vacuum gasket, holder.
Glass assembly CR. Cold trap reflux condenser, 500 cm
For reflux distillations with distributor and shut-off valve as well as for
distillation of low-boiling point solvents. No need of cooling liquid, but
e.g. dry ice. Application temperature: -70 to 40 °C. Content: 1 L
receiving flask, ball joint clamp, stopcock, feeding tubing, distributor.
Not inclusive: Evaporating flask, vapor duct, vacuum gasket, holder.
Glass assembly E. Expansion condenser, 1500 cm
Optimised for distillations of foaming substances and bumping
sample solutions. Used with recirculating chiller or tap water.
Features: Descending condenser with expansion vessel. Cleaning
hole on top. Connection for vapor temperature sensor. Content: 1 L
receiving flask, required tubings, ball joint clamp, stopcock, feeding
tubing, holder.
Not inclusive: Evaporating flask, vapor duct, vacuum gasket.
Glass assembly E. Expansion condenser, 1500 cm
Optimised for distillations of foaming substances and bumping
sample solutions. Used with recirculating chiller or tap water.
Features: Descending condenser with expansion vessel. Cleaning
hole on top. Connection for vapor temperature sensor. Content: 1 L
receiving flask (P+G), required tubings, ball joint clamp, stopcock,
feeding tubing, holder.
Not inclusive: Evaporating flask, vapor duct, vacuum gasket.
Glass assembly S. Vertical condenser reflux, 1500 cm
For reflux distillations with distributor and shut-off valve. Used with
recirculating chiller or tap water.
Features: Cleaning hole on top. Connection for vapor temperature
sensor. Inner glass tube. Content: 1 L receiving flask, required
tubings, ball joint clamp, stopcock, feeding tubing, distributor.
Not inclusive: Evaporating flask, vapor duct, vacuum gasket, holder.
2
2
, P+G-LT
2
2
, P+G-LT
2
2
, P+G
2
Anhang | 10
Best.
Nummer
040640
040642
048292
048293
11061112
11061113
048290
93/110