Buchi Rotavapor R-300 Bedienungsanleitung Seite 90

10 | Anhang
90/110
Schläuche
Tubing. FEP, Ø6/8 mm, transparent, per m
Use: Vacuum, cooling media.
Insulation tubing. Synthetic rubber, Ø10/23 mm, black, per m
For insulation of cooling media.
Meant to be used with silicone tubing (004134).
Tubing. Natural rubber, Ø6/16 mm, red, per m
Use: Vacuum.
Tubing. Nylflex, PVC-P, Ø8/14 mm, transparent, per m
Use: Vacuum, cooling media, feeding (industrial Rotavapor®).
Tubing. PTFE, Ø4.7/5.5 mm, transparent, 330 mm
Use: To introduce solvent into evaporating flask during distillation.
Tubing. PTFE, Ø4.7/5.5 mm, transparent, 460 mm
Use: To introduce solvent into evaporating flask during distillation.
Tubing. PTFE, Ø8/10 mm, white, per m
Use: Vacuum, feeding (industrial Rotavapor®).
Tubing. Silicone, Ø6/9 mm, transparent, per m
Use: Cooling media.
Tubing. Synthetic rubber, Ø6/13 mm, black, per m
Use: Vacuum.
Weiteres Zubehör
AutoDest sensor. Incl. cap nut, seal GL14
For automatic distillation. Measures temperature of cooling media
and the vapor temperature. Vacuum is adjusted according to cooling
capacity of condenser.
Meant to be used with the Interface I-300/I-300 Pro and glass
assembly V or S.
Combi-Clip, set. 50 pcs, not incl. vapor duct
Patented Combi-Clip with snap lock mechanism to fasten evaporating
flask on vapor duct.
Condensate trap. Grey, TPE, for condenser V, hose connector Ø8
mm
Collects and drains condensate which may accumulate at the
condenser.
Condensate trap. Green, TPE, for condenser V, hose connector Ø8
mm
Collects and drains condensate which may accumulate at the
condenser.
Cooling water valve. 24VAC
Valve opens cooling water feed during distillation.
Meant to be used with a vacuum controller/interface.
BÜCHI Labortechnik AG
Best.
Nummer
027900
028696
017622
004113
000646
000643
027277
004133
11063244
Best.
Nummer
11059225
11063308
11062955
11061985
031356
Bedienungsanleitung Rotavapor® R-300