Buchi Rotavapor R-300 Bedienungsanleitung Seite 92

10 | Anhang
92/110
Water regulation nozzle. Flow regulator, incl. hose clamp, sieve
Used when tap water is used to generate vacuum. Reduces water
consumption.
Woulff bottle. 125 mL, P+G, incl. holder
For trapping particles and droplets and for pressure equalization.
Woulff bottle. 3-neck, 800 mL, P+G.
For trapping particles and droplets and for pressure equalization.
Manometer with needle valve. Incl. vacuum gauge, not incl. holder
Glaswaren
Glasaufbauten
Glass assembly A. Diagonal condenser, 1500 cm
For standard distillations, used with recirculating chiller or tap water.
Features: Cleaning hole on top. Content: 1 L receiving flask, required
tubings, ball joint clamp, stopcock, feeding tubing.
Not inclusive: Evaporating flask, vapor duct, vacuum gasket, holder.
Glass assembly A. Diagonal condenser, 1500 cm
For standard distillations, used with recirculating chiller or tap water.
Features: Cleaning hole on top. Content: 1 L receiving flask (P+G),
required tubings, ball joint clamp, stopcock, feeding tubing.
Not inclusive: Evaporating flask, vapor duct, vacuum gasket, holder.
Glass assembly BY. Vertical intensive condenser, reflux, 1300cm
For particularly efficient condensation with double jacket condenser
as well as for reflux distillations with distributor and shut-off valve.
Used with recirculating chiller or tap water.
Features: Double jacket condenser. Additional joint on top of the
condenser for flexible expansion (SJ29/32). Connection for vapor
temperature sensor. Content: 1 L receiving flask, required tubings,
ball joint clamp, stopcock, feeding tubing, distributor.
Not inclusive: Evaporating flask, vapor duct, vacuum gasket, holder.
Glass assembly BY. Vertical intensive condenser, reflux, 1300 cm
+G
For particularly efficient condensation with double jacket condenser
as well as for reflux distillations with distributor and shut-off valve.
Used with recirculating chiller or tap water.
Features: Double jacket condenser. Additional joint on top of the
condenser for flexible expansion (SJ29/32). Connection for vapor
temperature sensor. Content: 1 L receiving flask (P+G), required
tubings, ball joint clamp, stopcock, feeding tubing, distributor.
Not inclusive: Evaporating flask, vapor duct, vacuum gasket, holder.
BÜCHI Labortechnik AG
Best.
Nummer
011606
11059905
025519
047391
Best.
Nummer
2
048168
2
, P+G 048169
2
048176
2
, P 048297
Bedienungsanleitung Rotavapor® R-300