Overload Protection - Sage Fresh & Furios SBL620 Kurzanleitung

• Be careful when handling and
cleaning blades, as they are
very sharp. Mishandling of the
blades may cause injury.
• Avoid putting the cup or jug on
the motor base while the motor
is still spinning.
• Do not operate without any
ingredients in the cup or jug.
• Never attempt to operate
with damaged blades, or with
utensils, or any foreign objects
inside the cup or jug.
• Do not put the cup or jug in
extremes of heat or cold, for
example placing a cold jug into
hot water, or vice versa.
• Lid must be firmly secured
to the jug before operation to
ensure internal contents do not
escape, spray or overflow.
• Do not remove the jug
from the motor base while
blender is in use.
• Do not process hot or boiling
liquids. Allow to cool before
placing into the blender jug.
• Do not use blender while

OVERLOAD PROTECTION

is flashing on the LCD. If this
occurs, unplug the blender and
wait for 30 minutes until the
motor has cooled. Once cooled,
you will be able to use the
blender as usual again.
SAVE THESE INSTRUCTIONS
4
• Under heavy load the blender
should not be operated for
more than 1 minute. Heavy
load for this blender is defined
as: 6 ice cubes (120g),
3 frozen banana halves (250g),
180g frozen raspberries,
500mL milk, 3 scoops ice
cream (140g). Under loading
equivalent to this or heavier the
blender should not be operated
for more than 1 minute.
The symbol shown
indicates that this appliance
should not be disposed of
in normal household waste.
It should be taken to a local
authority waste collection centre
designated for this purpose or to
a dealer providing this service.
For more information, please
contact your local council office.
To protect against electric
shock, do not immerse the
power plug, cord or appliance
in water or any liquid.