Babboe Mini Montageanleitung Seite 7

Mounting the poles onto the box
Step 2
It's not hard to mount the poles on the box, however
follow this order:
1. First, insert the poles on the handlebar side into the
appropriate holders.
2. Attach the middle extension piece to the front pole.
3. Then insert the front pole in the bracket and connect
the front pole with the connector piece of the poles
at the handlebar side. This will provide the necessary tension to the poles. This is
correct, it will keep them nicely in place.
Installing the canvas
Step 3
The order of installation is important for a perfect fit:
1. Lay the tent over the poles. Place the wide side of the tent at the handlebar side and
the narrow side with the strap at the front.
2. Pull the tent down over the poles and over the sides of the box. Ensure the poles sit at
the seams of the canvas.
3. Pull the straps at the corners on the handlebar side through the brackets and pull
slightly. (picture 5).
4. Then pull the strap under the bar at the front and pull. (picture 6).
5. Is the tent properly in place? Tightly pull the straps one by one, so that the tent is
Picture 5
under pressure.
6. If desired, you can now attach the straps/clips at the front of the tent to the box and
pull the straps tight.
Stap 4 Opening the windows
The windows on the sides can be opened in different ways:
Open the windows and keep them in place with the fastening clips, so that children can
get in. You could also opt to secure the straps at the front. This means there will be less
space to get in and out.
Picture 6