Offline Modus; Synergy Console 3.0.0 - Funktionstastenbelegung - Mahe MPS 240 Bedienungsanleitung

Schweißmaschine-inverter

Vorschau ausblenden

Inhalt

Inhaltsverzeichnis

MPS/MMS System 400V

7.7.6 OFFLINE Modus

Die Maschine ist nicht verfügbar! Die synergischen Daten können aber auch ohne

Maschine erzeugt werden

Das Programm SYCON.EXE starten

Laden der synergischen Daten von der Festplatte

Anpassen der notwendigen Daten

Speichern der Daten auf der Festplatte

Mit Laptop zur Maschine gehen und die Daten in die Maschine laden. (siehe

ONLINE Modus)

7.7.7 SYNERGY Console 3.0.0 - Funktionstastenbelegung

---------------------

Hotkey

Action

Ctrl+O

Open the table from a file (*.syt)

Ctrl+S

Save the table to a file (*.syt)

Ctrl+X

Exit program

Ctrl+R

Read the table from SYNERGY to PC (serial cable must be connected)

Ctrl+V

Verify the table in PC with SYNERGY (serial cable must be connected)

Ctrl+W

Write the table from PC to SYNERGY (serial cable must be connected)

Ctrl+F1

Select the COM1 serial port for communication with SYNERGY

Ctrl+F2

Select the COM2 serial port for communication with SYNERGY

Alt+0

Choose "MIG 2-step" welding mode

Alt+1

Choose "STICK" welding mode

Alt+2

Choose "Fe" as a welded metal

Alt+3

Choose "Inox" as a welded metal

Alt+4

Choose "Al" as a welded metal

Alt+5

Choose "0,6mm" as a welding wire diameter

Alt+6

Choose "0,8mm" as a welding wire diameter

Alt+7

Choose "1,0mm" as a welding wire diameter

Alt+8

Choose "1,2mm" as a welding wire diameter

Alt+9

Choose "1,6mm" as a welding wire diameter

Choose "THICKNESS" for direct adjustment with keys