Zibro TIN-327W Gebrauchsanweisung Seite 50

E
SETTING THE TEMPERATURE (WHEN COOLING OR HEATING)
Adjust the temperature after activating the airconditioner.
To lower the temperature
1
To raise the temperature
1
REMARKS
-
-
Indication green signal on the unit interior display (applies to type TIN 539):
-
-
Room temperature indication range 21 - 30° C. The temperature to be set varies
between 16 - 31° C.
Room temperature within indication range:
The set temperature (permanently illuminated light) and the room temperature
(flashing light) are displayed.
Room temperature or set temperature outside the indication range:
-
-
Room temperature and set temperature are identical:
-
Comments relating to the use of the "HEAT" FUNCTION
•
•
•
4
50
Press the button - 1 x lowers the temperature setting by 1 °C.
Press the button - 1 x raises the temperature setting by 1 °C.
The temperature can be set when using the automatic control function
(except when dehumidifying), but this is not shown in the display.
If the ambient temperature is too high, it may occur that the set room
temperature is not reached.
This shows the current and set temperatures.
The room temperature indicated may vary somewhat from the current room
temperature. Use it as a reference.
If the room temperature or set temperature is 31°C or higher, 30°C will
appear on the display.
If the room temperature or set temperature is 21° C or lower, 21° C appears
on the display.
The corresponding light is activated.
The effective operation of the airconditioner depends on the outside
temperature.
Defrost setting; If the outside temperature is extremely low, the unit
automatically switches to the defrost setting for 2 to 10 minutes. The
operation of the airconditioner is suspended during this period.
Pre-heating function; When the timer is ON, the airconditioner measures the
air temperature 1 hour before the set time and activates the unit in advance
if necessary.