Using A Memory Card - Renkforce RF-VRCAM-580HD 360 Bedienungsanleitung

9. Using a memory card

The Action Cam does not have its own memory. Check that a mem-
ory card is inserted before using the camera.
Refer to the "Technical data" for a list of compatible memory cards.
Some memory cards may not be recognised by the device.
Media must to be formatted in FAT 32.
If the camera does not recognise your memory card, remove the
memory card and insert it again.
The Action Cam must be off when inserting and removing the mem-
ory card.
• Open the cover over the card slot (10) and the USB port (11).
• Insert the memory card into the card slot (10) until it clicks into place.
• The memory card contacts must point upwards.
• Replace the cover over the card slot (10) and the USB port (11).
• To remove the memory card, press the memory card inwards. The memory
card will spring back and protrude out of the card slot (10), allowing you to
remove it from the camera.
The memory card cannot be read out on a computer via the USB port
(11). Insert the memory card into a card reader on a computer to view
and save the videos and photos.
35