Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Note – Call quality
To increase the call quality, make sure that you are near your
mobile phone during the call.
5.7 Disconnecting the headset
• Switch off both earphones.
• Disconnect the headset via the Bluetooth
device.
5.8 Battery capacity
• To save energy, the earphones automatically switch off if they are
not connected to a device for longer than ten minutes.
• When the battery level is low, a voice says 'Low battery, please
charge' and the status LED (3) flashes red.
• Charge the earphones as described in Section 4. Getting started.
Note
However, the talk and standby times may vary when used with
different mobile phones or other compatible Bluetooth
usage settings, usage styles and environments.
Note – Battery display
• Each status LED of the battery display (8) corresponds to 25%
of the capacity. When an LED is illuminated, this indicates that
this capacity level has already been reached. If three LEDs are
illuminated, the charging box is at least 75% charged.
Note – Battery display
• If all four status LEDs light up, the full capacity is available.
• Press the on/off button of the charging box (5) to switch it on
and to display its current capacity level.
6. Care and Maintenance
Only clean this product with a slightly damp, lint-free cloth and do
not use aggressive cleaning agents. Make sure that water does not
get into the product.
settings on your terminal
®
®
devices,
9
Werbung
