Hama Disc Bedienungsanleitung Seite 7

Note
• When the device is turned on, the earphones automatically
connect to one another.
• The left earphone is always the master. The right earphone is
guided by the information of the master.
• Therefore, when connecting the headset to terminal devices in
future, you merely have to put the master into pairing mode. The
other earphone is automatically connected.
5.3 Bluetooth
• The earphones and the terminal device should be no further than
one metre apart. The shorter the distance, the better.
• Ensure that both earphones are switched on and paired with one
another.
Note – Pairing
• Make sure that your Bluetooth
and Bluetooth
• For more information, please refer to the operating instructions
of your terminal device.
• Open the Bluetooth
Hama Disc appears in the list of Bluetooth
• Select Hama Disc and wait until this headset is listed as connected
in the Bluetooth
Note – Bluetooth
Some terminal devices require a password in order to connect to
another Bluetooth
• If your terminal device requests a password to establish the
connection, enter 0000.
Note – Displays/announcements
• If pairing was successful, the status LEDs (3) flash blue every five
seconds.
• If pairing with the terminal device was successful, you will hear a
voice say 'Pairing successful. Second device connected'.
6
pairing with terminal device
®
is activated.
®
settings on your terminal device and wait until
®
settings on your terminal device.
®
password
®
device.
®
-capable terminal device is on
®
devices found.
®