Make A Measurement - Pce Instruments Pce-Dfg N-Serie Bedienungsanleitung

Graphical representation
Here, you can choose whether you want the graphic to be shown during or after the measurement.
6.5

Make a measurement

Ongoing measurement
During an ongoing measurement, the current measurement value will be shown in the lower left
area ("Results") of the display in large letters.
Moreover, in a small area above the status bars, a green level display can be found.
Note:
As very high sampling rates can mean huge amounts of readings, not all readings are
displayed during a measurement dynamically. This applies to graphics as well as to
charts.
The actual number of readings will only be displayed when the measurement is
completed. This becomes apparent when the graphic or chart changes directly after
completion of a measurement.
The actual number of readings shown during a measurement depends directly on the
sampling speed selected:
Sampling speed
6
12
25
50
100
200
400
800
No. of readings in the preview
Every reading
Every reading
Every reading
One in 3 readings
One in 6 readings
One in 12 readings
One in 25 readings
One in 50 readings
© PCE Instruments
40