Battery Power; Charging The Rechargeable Battery - Sharp MD-MT80H Bedienungsanleitung

Battery Power

Do not force the battery cover open too far.
To the DC IN
5V socket
To the wall
socket
E-25
ENGLISH
1
AC 220-230V,
50/60 Hz

„ Charging the rechargeable battery

When a separately available rechargeable battery is
used for the first time or when you use it after a long
period of disuse, be sure to charge it fully.
1
Insert the rechargeable battery.
A rechargeable battery other than the AD-N70BT
2
cannot be charged.
2
Plug the AC adaptor into the wall socket, and
then insert the plug on the other end into the DC
IN 5V socket.
3
Press the MODE/CHRG button.
" " will flash, and battery will begin charging.
z After the rechargeable battery is charged or used, it
will get slightly warm. This is normal.
z When the portable MD is turned on or operating, the
battery will not be charged.