Herunterladen Inhalt Inhalt Diese Seite drucken

Troubleshooting - Clatronic WK 2954 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für WK 2954:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Always pull out the plug from the mains socket before cleaning and wait until
the unit has cooled down.
Do not use any wire brush or other abrasive objects.
Do not use any acidic or abrasive detergents.
Never immerse the device or the base in water or other liquids.
Water Container
Rinse the water container out with clean water. Then dry it off with a cloth.
Exterior of the Housing
Clean the housing after use with a slightly damp cloth.
The frequency of the decalcifying operation depends on the hardness of the
water and on how often the appliance is used.
If the machine switches off before the water boils, it probably needs to be
decalcifi ed.
Please do not use vinegar but a commercially available decalcifi cation agent
on the basis of citric acid. Only use the quantities stated in the instructions.
Important Note!
After descaling the device boil fresh water in it several times (approximately
3-4 times) in order to remove any residues. Do not consume this water.
GB
Problem
It is not possible to
switch the machine on.
The machine switches
off before the water has
boiled.
The machine does not
switch off.
38
05-WK 2954 Scala 38
Cleaning
Decalcifi cation

Troubleshooting

Possible Cause
After being used without
or with too little water the
machine has not cooled
down suffi ciently. The
thermostat has not yet
reset.
The heated base is coa-
ted with too much lime or
the circuit of the plug is
overloaded.
The lid is not closed.
Remedy
Allow the machine to cool
down for 15 min.
Descale the machine
as instructed.
Check the mains
connection.
Close the lid until it locks
in place.
28.12.2005, 14:30:56 Uhr

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis