babymoov NutriBaby A001101 Bedienungsanleitung Seite 18

Cooking times are based on cooking in the bottom basket. These times may vary according to the size of the pieces of food,
their quantity, the amount of empty space left in the basket, and the initial temperature of the food. You must increase the
cooking time if you use the second cooking basket.
To cook ingredients requiring different cooking times, place the foods that need to cook the longest in the bottom basket.
During cooking, add the second basket with the foods requiring a shorter cooking time.
Proceed in the same way, choosing the "defrosting" icon
F1. Once your ingredients are cooked, open the lid of the cooking bowl and let the food cool for a few minutes.
F2. Transfer the cooked food to the mixing bowl, using the spatula provided. For best results, do not blend more than 400 g
of cooked fruit or vegetables, or a total of 300 g of meat/vegetables, mix at a time.
F3. Hold the receptacle using the side opposite the spatula, which you will use as a pincer.
F4. Pour the cooking juices into the mixing bowl, dosing them according to the desired texture. Do not add more than 200 ml
of cooking juices.
F5. Place the lid on the mixing bowl and lock.
F6. Lock the mixing bowl onto the base. For your safety, the apparatus will not operate if the bowl is not locked on the base.
F7. Use the mode button to select the "blend" function on the screen
F8. Blend the preparation, pressing on the button for 5 seconds, then waiting 5 seconds, then blending again for 5 seconds.
Do not blend for more than 30 seconds to prevent overheating. Repeat this operation up to three times. We recommend
you then allow the apparatus to cool for 30 minutes prior to blending again.
- An alarm will sound if, during the cooking cycle, the apparatus tank runs out of water: remove the steamer baskets and
add water. Press OK to shut off the alarm, ensuring you reconnect the cooker to the blender, and restart the heating cycle
to finish cooking.
- An alarm will sound if, during the cooking cycle, the blender and the cooker are not correctly connected: Press OK to shut
off the alarm, reconnect the blender and cooker and restart the cooking cycle.
- An alarm will sound at the end of the cycle to notify you that cooking is complete.
H1. Unplug Nutribaby and ensure it is cool before cleaning.
CAUTION: The bases of the cooker and blender must not be washed in a dishwasher.
- Wipe off the cooking dome inside the tank, and the base of the mixing bowl with a damp cloth or sponge. Do not use
detergents or cleaners. Allow to dry. Do not immerse Nutribaby in water or any other liquid. Do not wash Nutribaby
under running water. Do not allow water to enter parts containing electrical components.
- Do not use abrasive or scouring cleansers for cleaning as they may damage the apparatus and its surfaces.
- The cooking baskets, removable trays, cooking juices receptacles, lids, spatula and mixing bowl may be washed
using a sponge, hot water and dish detergent. Rinse well and allow to dry. These elements are also dishwasher safe.
Descaling the cooking tank
After Nutribaby has been used for a certain time, mineral deposits may form on the cooking dome and damage it. You
should descale the cooking tank regularly (after five cycles), pouring 100 ml of hot water and 100 ml of white vinegar
on the resistance. Let it sit for one to two hours (or more if necessary), without plugging in the apparatus. Pour off the
mixture and wipe off the cooking dome with a wet cloth.
H2. Removing the blades
18
COOKING TIMES see page 9
E. DEFROSTING
.
F. BLENDING
G. ALARMS
H. CLEANING NUTRIBABY
NUTRIBABY • Instruction manual
.