Power Button - Comtel CT-2100 Bedienungsanleitung

DETAILED OPERATION OF TRANSMITTER
BATTERY COMPARTMENT
Insert 1.2V AAA rechargeable battery x 3 (safety-enhanced type) to
TRANSMITTER or 1.5V AAA Alkaline battery. Alternatively, use the AC adaptor
to connect to TRANSMITTER.
AC ADAPTOR
Make sure that the AC adaptor input voltage is the same as the AC outlet voltage.

POWER BUTTON

This is the main power switch of the TRANSMITTER. Press the button to turn on
the unit.
CHANNEL A/B LED INDICATOR
To avoid interference, COMTEL CT-2100™ provides two user selectable
channels. Press and hold the menu button "M" until the channel LED "A" or "B"
flashes, press the up ▲ or down▼ button to select the channel. Press the "M"
button again to confirm the selection. Make sure both TRANSMITTER and
RECEIVER must work in the same channel.
POWER / STANDBY LED INDICATOR
When turning on the power switch, the GREEN LED will light.
When there is no sound, the GREEN LED will flash to indicate the standby mode.
When the battery power is low, the GREEN LED will turn into RED color.
SENSITIVITY LEVEL
Press and hold the menu button "M" until the sensitivity LED flashes, press the up
▲ or down▼ button to select the sensitivity level you prefer. The sensitivity level
will increase from low, middle to high along with the 3 LEDs from left to right.
Adjust for the voice active sensitivity level as you prefer, e.g. during night time, you
26