Philips QC5070 Bedienungsanleitung Seite 10

English
10
using the precision trimmer
You can use the precision trimmer for precise contouring and defining.
1 Push the middle part of the cutting unit upwards with your thumb
until it opens and then pull it off the appliance (Fig. 9).
Be careful that the cutting unit does not fall to the floor.
2 Place the lug of the precision trimmer in the slot and push the
unit onto the appliance ('click') (Fig. 10).
Cleaning
Clean the appliance every time you have used it.
Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as alcohol, petrol or acetone to clean the appliance.
Only clean the appliance and the adapter with the cleaning brush
supplied.
1 Make sure the appliance is switched off and disconnected from the
mains.
2 Pull the comb off the appliance (Fig. 8).
3 Push the middle part of the cutting unit upwards with your thumb
until it opens and then pull it off the appliance (Fig. 9).
Be careful that the cutting unit does not fall to the floor.
4 Clean the cutting unit with the cleaning brush supplied (Fig. 11).
5 Clean the inside of the appliance with the cleaning brush
supplied (Fig. 12).
6 Place the lug of the cutting unit into the slot and push the cutting
unit back onto the appliance ('click') (Fig. 10).
Note: This appliance does not need any lubrication.