Before Putting Into Operation; Warranty - Badger Meter LM OG Montage- Und Bedienungsanleitung

Basic safety recommendations / Before putting into operation / Warranty
Cleaning
Switch off all units and isolate from mains before cleaning.
Clean using a damp cloth. Do not use liquid or aerosol cleaners.
Repair of faults
Disconnect all units from power supply and have it repaired by a qualified service person if
any of the following occurs:
•
If any power cord or plug is damaged or frayed
•
If a unit does not operate normally when operating instructions are followed
•
If a unit exposed to rain/water or if any liquid has been spilled into it
•
If a unit has been dropped or damaged
•
If a unit shows a change in performance, indicating a need for service.
Failure to adhere to these safety instructions
may result in damage to the product or serious
RoHs
Our products are RoHs compliant.
Battery disposal
The batteries contained in our products need to be disposed of as per your
local legislation acc. to EU directive 2006/66/EG.

3. Before putting into operation

Please check that the technical data of the installation match with those of the lube meter,
for example connections, pressure, flow range and medium. Once the meter has been
installed, please make sure that no air, pressure shocks or particles can damage the
meter. Please check all connections to leakage. After the installation we recommend to do
several transactions into an approved tank. Should the use of different oil viscosities show
discrepancies by the error limit, this can immediately be corrected at the site. This avoids
to remove or exchange the meter. In case of pretested meters can corrections be carried
out by technicians or officials of the National Weights and Measure Laboratory.

4. Warranty

Badger Meter warrants meters and parts manufactured by it and supplied hereunder to be
free from defects in materials and workmanship for a period of 18 months from date of
shipment or 12 months from date of installation, whichever period shall be shorter. If
within such period any meters or parts shall be proved to Seller´s satisfaction to be
defective, such meters or parts shall be repaired or replaced at Seller´s option. Seller´s
obligation hereunder shall be limited to such repair and replacement and shall be
conditioned upon Seller´s receiving written notice of any alleged defect within 10 days
after its discovery and, at Seller´s option, return of such meters or parts to Seller, f.o.b. its
factory. THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER
EXPRESS OR IMPLIED WARRANTIES WHATSOEVER INCLUDING BUT NOT LIMITED
TO IMPLIED WARRANTIES (EXCEPT OF TITLE) OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. Badger Meter shall not be liable for any
defects attributable to acts or omissions of others after shipment, nor any consequential,
incidental or contigent damage whatsoever.
bodily injury.
LM_OG_BA_98_1105
Page 11/28