Basic Operations; Advanced Cd Or Mp3 Disc Playback; Repeat Play; Random Play - Pioneer X-SMC02 Bedienungsanleitung

05 Disc playback

Basic operations

Function Main unit
Play
Stop
Pause
Track up/
down
Fast
forward/
reverse
12
En
Remote Operation
control
Press in the stop mode.
Press in the playback mode.
(when playing a CD)
"RESUME" is displayed and
the place where you
stopped play is memorized.
Press again and the
memorized position is
cleared.
Press in the playback mode.
Press 1; to resume
playback from the paused
point.
Press in the playback or
stop mode.
If you press the button in the
stop mode, press 1; to
start the desired track.
(when playing MP3)
You can only skip forward
or back to music files inside
the same folder.
Press and hold down in the
playback mode.
Release the button to
resume playback.

Advanced CD or MP3 disc playback

Repeat play

Repeat play can play one track, all tracks or a programmed
sequence continuously.
To repeat one track:
Press repeatedly until "RPT ONE" appears. Press
ENTER.
To repeat all tracks:
Press repeatedly until "RPT ALL" appears. Press
ENTER.
To repeat desired tracks:
Perform steps 1 - 5 in "Programmed play (CD)" section
(page 13) and then press
appears. Press ENTER.
To cancel repeat play:
Press repeatedly until "RPT OFF" appears. Press
ENTER.
Note
• After performing repeat play, be sure to press ∫.
Otherwise, the disc will play continuously.
• During repeat play, random play is not possible.

Random play

The tracks on the disc can be played in random order
automatically.
To random play all tracks:
Press RANDOM repeatedly until "RDM ON" appears. Press
ENTER.
To cancel random play:
Press RANDOM repeatedly until "RDM OFF" appears. Press
ENTER.
Note
• If you press the 9 during random play, you can move
to the track selected next by the random operation. Play
returns to the beginning of the track when : is
pressed (you cannot return to the previous track).
repeatedly until "RPT ALL"