Using The Wake-Up Timer; Setting; Switching The Wake-Up Timer On/Off; Using The Sleep Timer - Pioneer X-SMC02 Bedienungsanleitung

04 Getting started

Using the wake-up timer

Setting

1 Press Í to turn the power on.
2 Press and hold TIMER on the remote
control.
3 Press  /  to select "ONCE" or "DAILY",
then press ENTER.
ONCE – Once timer play works for one time only at a
preset time.
DAILY – Daily timer play works at the same preset time
and days of week.
• You can make one timer setting with ONCE and one
timer setting with DAILY. Note that if the start time is set
to the same day of the week and time for both the
ONCE timer and DAILY timer, priority is given to the
ONCE.
4 Press  /  to select "TIMERSET", then
press ENTER.
5 Press  /  to select the timer playback
source, then press ENTER.
• CD, DAB (X-SMC02D only), FM and USB can be
selected as the playback source.
• Some discs may not be played automatically at the
wake-up time.
• When DAB or FM is selected as the source, the station
received before setting the timer is played.
6 Press  /  to select the timer day, then
press ENTER.
7 Press  /  to set the hour, then press
ENTER.
8 Press  /  to set the minute, then press
ENTER.
Set the time to finish as in steps 7 and 8 above. If you set the
timer, take one minute or more between the start and end
time.
9 Adjust the volume press VOL +/– , then
press ENTER.
"SAVE" appears on the display.
10 Press Í to enter the power standby mode.
The TIMER indicator lights up.
10
En

Switching the wake-up timer ON/OFF

If the timer is already set, you can turn the function ON or
OFF.
• When the ONCE timer finishes, the timer automatically
turns off. To use the same settings again, set "TIMER
ON". Even when the DAILY timer finishes, the timer
does not automatically turn off. To cancel, set
"TIMEROFF".
1 As well as steps 1 through 3 in "Setting".
2 Press  /  to select "TIMER ON" or
"TIMEROFF", then press ENTER.
3 To use the timer, press Í and set the unit to
standby.

Using the sleep timer

The sleep timer switches off the unit after a specified time so
you can fall asleep without worrying about it.
1 Press SLEEP repeatedly to select a switch
off time.
Choose between 10 min, 20 min, 30 min, 60 min, 90 min, 120
min, 150 min, 180 min or OFF. The newly set value displays
for 3 seconds, and then the setting is completed.
Note
• The sleep timer can be set by pressing SLEEP while
the remaining time is displayed.

Auto power off setting

This setting places the unit on standby automatically for
more than 20 minutes of inactivity without any audio input.
1 Press MENU on the remote control.
"APD" will be displayed on the main display.
2 Press ENTER on the remote control.
Press / to switch auto power off setting
3
ON/OFF.
• Initial setting is set to ON.
Note
• When the auto power off is set to ON, "APD ON" will be
displayed on the main display.
• When the auto power off is set to OFF, "APD OFF" will
be displayed on the main display.