Other Connections; Connecting Auxiliary Components; Automatic Switching To Audio In Input (Audio In Detect) - Pioneer X-SMC02 Bedienungsanleitung

Other connections

Chapter 8:
Other connections
CAUTION
• Before making or changing the connections, switch off
the power and disconnect the power cord from the AC
outlet.
• We will not accept responsibility for damage arising
from the connection of equipment manufactured by
other companies.

Connecting auxiliary components

Connect your auxiliary playback component using the
AUDIO IN input on the top of this unit.
Portable audio player, etc.
3.5 mm stereo mini-plug
cable (commercially
available)
1 Press AUDIO as the input source.
When AUDIO IN is selected, "AUDIO IN" is displayed on the
main display.
Note
• If the AUDIO IN mini-plug jack is connected to auxiliary
phones jack, the volume of the unit will be adjusted by
the volume on the playback component. If the sound is
distorted after you lower the volume of the unit, try
lowering the volume on the auxiliary playback
component.
Automatic switching to Audio In
input (Audio In Detect)
This function automatically switches to "AUDIO IN" when
there is audio input to the AUDIO IN jack.
1 Press MENU and then press / until "AUD
DETE" appears on the display.
Press ENTER and then press / to
2
switch AUD DETE ON/OFF.
• It is set to OFF in the factory setting.
Note
• When the AUD DETE is ON, "DETE ON" is displayed on
the main display.
• When the AUD DETE is OFF, "DETE OFF" is displayed
on the main display.
08
21
En