Inhaltsverzeichnis
Werbung
channel set for a track when the corresponding track fader is moved.
❍Expression (Controller number 11)
Status
2nd byte
BnH
0BH
n = MIDI channel number:
vv = Expression:
* When the MIDI parameter "MIDI Fader" is set to ON, this is transmitted via the MIDI
channel set for the EXP PEDAL when the EXP PEDAL is operated.
●Program Change
Status
2nd byte
CnH
ppH
n = MIDI channel number:
pp = Program number:
* Transmitted according to the content of the SMF during playback of SMFs.
* When the MIDI parameter Effects P.C. is set to PC ONLY oder PC+BANK, this is
transmitted via the MIDI channel selected in the Effects Channel setting when insert
effects patches are-Schaltered.
* For the correspondence between Bank Select/Program numbers und the insert effect
patch banks/numbers, see p. 343.
●Channel Pressure
Status
2nd byte
DnH
vvH
n = MIDI channel number:
vv = Channel Pressure:
* Transmitted according to the content of the SMF during playback of SMFs.
●Pitch Bend Change
Status
2nd byte
EnH
llH
n = MIDI channel number:
mm, ll = Pitch Bend value:
* Transmitted according to the content of the SMF during playback of SMFs.
■Channel Mode Messages
* Transmitted according to the content of the SMF during playback of SMFs.
●All Sound Off (Controller number 120)
Status
2nd byte
BnH
78H
n = MIDI channel number:
●Reset All Controllers (Controller number 121)
Status
2nd byte
BnH
79H
n = MIDI channel number:
●All Notes Off (Controller number 123)
Status
2nd byte
BnH
7BH
n = MIDI channel number:
●Omni Off (Controller number 124)
Status
2nd byte
BnH
7CH
n = MIDI channel number:
●Omni On (Controller number 125)
Status
2nd byte
BnH
7DH
n = MIDI channel number:
3rd byte
vvH
0H - FH (ch.1 - ch.16)
00H - 7FH (0 - 127)
0H - FH (ch.1 - ch.16)
00H - 7FH (prog.1 - prog.128)
0H - FH (ch.1 - ch.16)
00H - 7FH (0 - 127)
3rd byte
mmH
0H - FH (ch.1 - ch.16)
00 00H - 40 00H - 7F 7FH (- 8192 - 0 - +8191)
3rd byte
00H
0H - FH (ch.1 - ch.16)
3rd byte
00H
0H - FH (ch.1 - ch.16)
3rd byte
00H
0H - FH (ch.1 - ch.16)
3rd byte
00H
0H - FH (ch.1 - ch.16)
3rd byte
00H
0H - FH (ch.1 - ch.16)
●Mono (Controller number 126)
Status
2nd byte
BnH
7EH
n = MIDI channel number:
mm = mono number:
●Poly (Controller number 127)
Status
2nd byte
BnH
7FH
n = MIDI channel number:
■System Common Messages
●Quarter Frame Messages
Status
Second
F1H
mmH (= 0nnndddd)
nnn = Message type:
dddd = 4 bit nibble data:
* If the Sync parameter "Sync Gen." is set to "MTC," quarter frame messages of the time
code type specified by "MTC Type" will be transmitted when the BR-1200CD is running
(recording oder playing). The transmitted time counts are summed to "SMPTE (MTC)
Offset Time" as the song top is "00:00:00:00".
Bit Field is assigned as follows.
Frame Count
xxxyyyyy
xxx
Reserved (000)
yyyyy
Frame No. (0-29)
Seconds Count
xxyyyyyy
xx
Reserved (00)
yyyyyy
Seconds (0-59)
Minutes Count
xxyyyyyy
xx
Reserved (00)
yyyyyy
Minutes (0-59)
Hours Count
xyyzzzzz
x
Reserved (0)
yy
Time Code Type
* The time code types defined by the MIDI specification correspond to the BR-1200CD
Sync parameter "MTC Type" as follows.
MIDI specification setting
0 = 24 Frames / Sec
1 = 25 Frames / Sec
2 = 30 Frames / Sec (Drop Frame)
3 = 30 Frames / Sec (Non Drop Frame
zzzzz
●Song Position Pointer
Status
2nd byte
F2H
mmH
mm, nn=Song position point:
* The current position is transmitted by the Song Position Pointer Message when the BR-
1200CD is stopped, oder the locate operation has been performed, if the SYNC
parameter "Sync Gen." is set to "MIDI CLOCK."
3rd byte
mmH
0H - FH (ch.1 - ch.16)
00H - 10H (0 - 16)
3rd byte
00H
0H - FH (ch.1 - 16)
0 = Frame count LS nibble
1 = Frame count MS nibble
2 = Seconds count LS nibble
3 = Seconds count MS nibble
4 = Minutes count LS nibble
5 = Minutes count MS nibble
6 = Hours count LS nibble
7 = Hours count MS nibble
0H - FH (0 - 15)
"MTC Type" setting
24
25
29D
29N oder 30
Hours
3rd byte
nnH
00H 00H - 7FH 7FH
345
Werbung
Inhaltsverzeichnis
