Inhaltsverzeichnis
Werbung
DIGITAL RECORDING STUDIO
BR-1200CD
1. Receive data
■Channel Voice Messages
●Note off
Status
2nd byte
8nH
kkH
n = MIDI channel number:
kk= Note number:
vv = Note off velocity:
●Note on
Status
2nd byte
9nH
kkH
n = MIDI channel number:
kk= Note number:
vv = Note on velocity:
* Received via drums MIDI channel when the MIDI parameter "Drums Ch." is set to 1–16;
plays drum sound.
* Received via bass MIDI channel when the MIDI parameter "Bass Ch." is set to 1–16;
plays bass sound.
* Drum sounds correspond to note numbers as follows.
Drum name
Note number
Hi-Q
D#1 (27)
Stick
G 1 (31)
Metronome (click)
A 1 (33)
Metronome (bell)
A#1 (34)
Kick 2
B 1 (35)
Kick 1
C 2 (36)
Snare 1
D 2 (38)
Snare 2
E 2 (40)
Tom 1
F 2 (41)
Closed hi-hat
F#2 (42)
Tom 2
A 2 (45)
Open hi-hat
A#2 (46)
Tom 3
C3 (48)
Crash cymbal
C#3 (49)
Tom 4
D 3 (50)
Ride cymbal
D#3 (51)
Cow bell
G#3 (56)
Claves
D#5 (75)
●Control Change
❍Bank Select (Controller number 0, 32)
Status
2nd byte
BnH
00H
BnH
20H
n = MIDI channel number:
mm,ll = Bank number:
* When the MIDI parameter Effects P.C. is set to PC+BANK, this is transmitted via the
MIDI channel selected in the Effects Ch. setting when insert effects patches are-
Schaltered.
❍Volume (Controller number 7)
Status
2nd byte
BnH
07H
n = MIDI channel number:
vv = Volume:
* Received via each track's MIDI channel when the MIDI parameter "MIDI Fader" is set to
ON; controls the track volume.
3rd byte
vvH
0H - FH (ch.1 - ch.16)
00H - 7FH (0 - 127)
00H - 7FH (0 - 127)
3rd byte
vvH
0H - FH(ch.1 - ch.16)
00H - 7FH(0 - 127)
01H - 7FH(1 - 127)
3rd byte
00H
llH
0H - FH (ch.1 - ch.16)
00 00H - 7F 7FH (bank.1 - bank.16384)
3rd byte
vvH
0H - FH (ch.1 - ch.16)
00H - 7FH (0 - 127)
❍Expression (Controller number 11)
Status
2nd byte
BnH
0BH
n = MIDI channel number:
vv = Expression:
* Received via the MIDI channel set for the EXP PEDAL when the MIDI parameter "MIDI
Fader" is set to ON; controls the effects in the same manner as operating the EXP
PEDAL.
●Program Change
Status
2nd byte
CnH
ppH
n = MIDI channel number:
pp = Program number:
* When the MIDI parameter Effects P.C. is set to PC ONLY oder PC+BANK, this is
received via the MIDI channel selected in the Effects Channel setting und is used to-
Schalter the insert effects.
* Bank Select und Program numbers correspond to the insert effect patch banks und
numbers as shown below.
Bank Select
Program
Number
MSB
LSB
00H
00H–77H
01H
00H–31H
00H
03H
00H–31H
04H
00H–31H
00H
00H–77H
01H
00H–31H
01H
03H
00H–31H
04H
00H–31H
00H
00H–77H
01H
00H–31H
02H
03H
00H–31H
04H
00H–31H
■Channel Mode Messages
❍All Sound OFF (Controller number 120)
Status
2nd byte
BnH
78H
n = MIDI channel number:
* Received via drums MIDI channel when the MIDI parameter "Drums Ch." is set to 1–16;
mutes the playing drum sounds.
* Received via bass MIDI channel when the MIDI parameter "Bass Ch." is set to 1–16;
mutes the playing drum sounds.
❍Reset All Controllers (Controller number 121)
Status
2nd byte
BnH
79H
n = MIDI channel number:
* Received via the MIDI channel set for the EXP PEDAL when the MIDI parameter "MIDI
Fader" is set to ON.
* When this message is received, the EXP PEDAL is reset to 127.
❍All Note Off (Control number 123)
Status
2nd byte
BnH
7BH
n = MIDI channel number:
* Received via bass MIDI channel when the MIDI parameter "Bass Ch." is set to 1–16;
turns the playing bass note off.
MIDI Implementation
Version: 1.00
3rd byte
vvH
0H - FH (ch.1 - ch.16)
00H - 7FH (0 - 127)
0H - FH (ch.1 - ch.16)
00H - 7FH (prog. 1 - prog. 128)
Patch
Bank
Number
GUITAR
P001–P120
MIC
P001–P050
STEREO
P001–P050
SIMUL
P001–P050
GUITAR
U001–U120
MIC
U001–U050
STEREO
U001–U050
SIMUL
U001–U050
GUITAR
S001–S120
MIC
S001–S050
STEREO
S001–S050
SIMUL
S001–S050
3rd byte
00H
0H - FH (ch.1 - ch.16)
3rd byte
00H
0H - FH (ch.1 - ch.16)
3rd byte
00H
0H - FH (ch.1 - ch.16)
343
Werbung
Inhaltsverzeichnis
