Care And Cleaning; Declaration Of Conformity (Doc); Technical Data - Renkforce RF-IDC9607LW Bedienungsanleitung

Setting 2D symbologies
Data Matrix ENABLE / DISABLE
QR Code ENABLE / DISABLE
Micro QR Code ENABLE / DISABLE
PDF 417 ENABLE / DISABLE
Glove holster
The barcode scanner can be attached to the glove holster provided, which you can wear on
your hand. The scanner can be triggered using the cable trigger. This prevents fatigue and
strain in your hands during periods of prolonged use. For more information, refer to "How to
assemble the wearable set" on page 9 of the quick start guide.

Care and cleaning

• Always disconnect the product from the power supply before cleaning it.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may
damage the housing or cause the product to malfunction.
• Use a dry, lint-free cloth to clean the product.
• Dust can be easily removed using a clean long-haired brush.

Declaration of Conformity (DOC)

Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declares that this
product conforms to the 2014/53/EU directive.
Click on the following link to read the full text of the EU declaration of conformity:
www.conrad.com/downloads
Select a language by clicking on the corresponding flag symbol, and then enter
the product order number in the search box. The EU Declaration of Conformity is
available for download in PDF format.
Disposal
Electronic devices are recyclable waste and must not be placed in household waste.
At the end of its service life, dispose of the product in accordance with applicable
regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.

Technical data

Operating voltage ..............................5 V/DC ± 5 %
Operating current ...............................350 mA
Charging current ................................Max. 500 mA
USB cable length ...............................Approx. 18 cm
Internal rechargeable battery .............Built-in Li-ion battery, 3.7 V, 900 mAh
Internal memory ................................. 1 MB (can store up to 65,000 datasets for
EAN 13 barcodes)
Battery life .......................................... At least 10,000 scans (after full charge)
Charging time ....................................Approx. 4–5 hours (full charge)
Wireless range ...................................100 m in open spaces
Working frequency .............................2.4 GHz
Bluetooth class ..................................Class 1 (up to 100 mW)
Radio transmission power .................Max. up to 12 dBm
Bluetooth profile .................................HID/SPP or later
LCD display .......................................32 x 25 mm, 128 x 64 pixels
Scan element type .............................LED (wavelength 625 ±10 nm)
Depth of field ..................................... Code 39 (20 mil), 320 mm
Sensor ...............................................CMOS (752 x 480 pixels)
Best resolution ...................................1D (CODE39)≥ 5 mil
2D (PDF417) ≥ 6 mil
Required contrast ..............................≥30 % (between printed surface and barcode)
Symbologies ...................................... Code 128, EAN-13, EAN-8, Code 39, UPC-A, UPC-E,
Codabar, Interleaved 2 of 5, Industrial 2 of 5, MSI, ISBN/
ISSN, Code 93, UCC/EAN-128, GS1 Databar, PDF417,
QR Code, Micro QR Code, Data Matrix
Scan speed......... ...............................30 scans/second
Scanning angle ..................................Tilt: 360° / Pitch ±50° / Skew ±50°
Operating conditions .......................... 0 to +50 °C, 5–95 % relative humidity (non-condensing)
Storage conditions ............................. -10 to +60 °C, 5–95 % relative humidity (non-
condensing)
Dimensions (W x H x D) ....................100 x 27 x 43 mm
Weight ...............................................Approx. 72 g
Enable/disable Data Matrix
Enable/disable QR Code
Enable/disable Micro QR Code
Enable/disable PDF 417
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, (e.g. photocopying, microfilming, or capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2017 by Conrad Electronic SE. *1583217_v3_0118_02_DS_m_4L_(1)