ANSMANN Basic 4 Bedienungsanleitung Seite 4

Plug-in charger Basic 4
E-block NKWNIMH.
signalises the charging process of the
LED red (2): This LED signalises the charging process of the
9 Volt block.
Always insert batteries with correct direction of poles according to
the svmbols in the chamina box.
This charger is designed for charging of rechargeable
other hmes of batteries. Dsnoer of exdosionl
in a dry place (indoor use only).
Keep your charger
of fire and electric shock!
taken to 8uthorized de8lerS.
kfentifkation plate) and place the batteries into the battery
mounting adapter on the charger. The charger will then start up
a
certain time (cf. table of charging times (a)),
batteries are to be taken out of the charger. Danger of
Only discharged batteries should be
charged as recommended in the table of
charging times 43) below.
Formula
conserve the environment and safe money by doing so.
Rechargeable batteries are not to be disposed in domestic waste.
Give used batteries back to your dealer or rather to the battery
Do not practise any cleaning or maintenance work, if your
charger is plugged in. In order to guarantee a perfect function of
the charger, keep the contacts inside the charging boxes free of
dirt. Do not plug in the charger in case of damaged cabinet or
Danger
power plug. Never open the charger. Chargers in need of repair
must be taken to authorized dealers.
Prim.:
sec.:
1.4 (chamina factor) x caoacitv (mAh)
charging current (mA)
230V - 50Hz
70mA / 30mA
1 x lOV=
Error and misprint excepted.