Inhaltsverzeichnis
Werbung
EN
3
CONNECTION OF THE WATER SUPPLY
PIPE
Connect a clean water supply pipe (Fig.
3) to the water mains, checking
to ensure that the minimum pressure is of
1.5 bar and maximum is of 6 bar, with a
minimum flow rate of 7 l per min.
- Connect the water supply pipe (min. diam ½") to
the water mains (fig.3)
- Fit the click-on attachment (Fig. 4 - pos.1) onto the
fitting (2);
4
HIGH PRESSURE PIPE CONNECTION
- Insert the high pressure pipe (Fig. 5- os.
appliance attachment
- Rotate the plastic ring nut, thoroughly tightening it
- Turn on the water tap
Assembly of the detergent spraying device
(Fig. 6)
- Insert the sprayer pipe into the spray gun
- Rotate the pipe by 90°, and on extracting it, click it
in.
5
ELECTRICAL CONNECTION OF THE AP-
PLIANCE
The mains voltage must match the operating voltage.
(See identification plate)
- Insert the plug into a power socket installed in
compliance with regulations.
Check the minimum section of the individual cables
using extensions.
Position the extensions so as to maintain the protection
class of the equipment.
Voltage V
Cable
length m
230
up to 20
230
20 to 50
6
APPLIANCE ACTIVATION
Operate the equipment in vertical position
only after connecting the water supply pipe
and turning on the tap (fig.2)
- Press button I (Fig.7-ON) on the main switch posi-
- Position the spray gun on the object to be
- Press the safety device (Fig. 8 - pos. 1) - the gun is
- Direct the nozzle downwards (Fig.2)
- Fully press down the trigger (Fig. 8 - pos.2)
7
- Press the button marked with an
- Turn off water supply tap.
into
- Actuate spray gun until water drips from the nozzle
- Release trigger.
- Press safety latch on spray gun. (Fig.9). The spray
- Unplug machine from socket outlet.
- Disconnect water supply hose from machine and
8
Nozzle
The nozzle (6 - Fig.1) can be adjusted continuously
by turning the black bushing: from a pinhole jet to flat
jet (Fig.
Turbo nozzle ( 12 - Fig. 1 - optional )
The turbo nozzle, is ideal for maximizing cleaning,
cannot be adjusted.
Cross-section
mm
2
1,5
2,5
tioned at the rear of the device
cleaned - never on people !
released
SWITCHING OFF THE MACHINE
(Fig. 7 - OFF)
(machine is now de-pressurized).
gun is locked and cannot be actuated accidental-
ly.
water supply mains.
EQUIPMENT
on the switch
Werbung
Inhaltsverzeichnis
