Herunterladen Inhalt Inhalt Diese Seite drucken

Switching Off The Machine; Appliance Activation - Elektro Maschinen HDEm 2250 Premium Bedienungsanleitung

Hochdruck-kaltwasser-reinigungsgerät
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
EN
4
HIGH PRESSURE PIPE CONNECTION
- Unwind the pressure hose off the hose drum.
Screw the high pressure tube onto the gun
(Fig. ).
Assembly of the detergent spraying device
(Fig. )
- Insert the nozzle into the spray gun
- Rotate the nozzle by 90°, and on extracting it,
click it in.
5
ELECTRICAL CONNECTION OF THE
APPLIANCE
The mains voltage must match the operating voltage.
(See identification plate)
- Insert the plug into a power socket installed in
compliance with regulations.
Check the minimum section of the individual cables
using extensions.
Position the extensions so as to maintain the protection
class of the equipment.
Voltage
Cable
V
length m
230
up to 2
230
20 to 5
6

APPLIANCE ACTIVATION

Operate the equipment in vertical position
only after connecting the water supply pipe
and turning on the tap (fig.2)
- Press button 21 (Fig.) on the main switch posi-
tioned at the rear of the device
- Position the spray gun on the object to be
cleaned - never on people !
- Press the safety device (Fig.  - pos. 1) - the gun is
released
- Direct the nozzle downwards (Fig.2)
- Fully press down the trigger (Fig.  - pos.2)
- Press the button marked with an 2)) on the switch
- Turn off water supply tap.
- Actuate spray gun until water drips from the nozzle
- Release trigger.
- Press safety latch on spray gun. (Fig.). The spray
- Unplug machine from socket outlet.
- Disconnect water supply hose from machine and
Variable nozzle
The nozzle (6 - Fig.) can be adjusted continuously by
turning the black bushing: from a pinhole jet (Fig.1)
to flat jet (Fig.1).
Turbo nozzle ( 5 - Fig.1 )
The turbo nozzle, is ideal for maximizing cleaning,
cannot be adjusted.
Cross-section
$QJOHV QR]]OH (  - Fig.1 )
2
mm
1,5
The angles nozzle, is turned and adjusted if
2,5
necessary.
ADDITION OF DETERGENT
Fill the detergent tank ( Fig. 1 ) with detergent, di-lute
as recommended.
7

SWITCHING OFF THE MACHINE

(Fig. )
(machine is now de-pressurized).
gun is locked and cannot be actuated accidental-
ly.
water supply mains.
8
ACCESSORIES
(Fig. 1-1).
The detergents must not be al-
lowed to dry on the object to be
cleaned.
detergent
.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis