Rittal CMC III Installationsanleitung Und Kurz-Bedienungsanleitung Seite 9

5.3 Settings
By default, the 1001, 1002 and 1003 access codes have access authorisation for the handle installed
on the CMC III CAN bus access. The access authorisation is changed in the access.cmc3 file. After
the first access attempt, this file is contained in the upload folder on the CMC III Processing Unit. It can
be downloaded with FTP and then changed with an editor.
Further information concerning this topic is contained in the main guide at www.rittal.com (see
Section 1.1).
In a later update, it is planned to integrate the configuration of the access authorisations on the Web
user interface.
• Enter an authorised access code.
The green LED lights continually for approx. 2 seconds (Fig. 2, Pos. 4).
• Enter an unauthorised access code.
The red LED lights continually for approx. 2 seconds (Fig. 2, Pos. 3).
To determine whether any software updates are required: see www.rittal.com or contact Rittal Service
(see Section 6).
6 Service
For technical questions, please contact:
Tel.: +49 (0) 2772/505-9052
E-mail: info@rittal.de
Homepage: www.rittal.com
For complaints or service requests, please contact:
Tel.: +49 (0) 2772/505-1855
E-mail: service@rittal.de
Rittal CMC III Coded Lock
Service
EN
8