SECUDO D 130 Betriebsanleitung Seite 111

Hotline: +49 (0) 5242 40 836 - 0
08:00 – 18:00
By purchasing this item, you have chosen a high-quality,
bi-directional radio transmitter module. Please read these
operating instructions carefully to ensure correct operation
and keep them in a safe place so that you can refer back
to them if necessary. Use this product only as intended
(as described in the operating instructions). Do not alter,
modify or paint the device, as this will result in loss of
warranty.
D 130 I/O module
D 140 I/O module
The D 130 I/O module/D 140 I/O module (hereafter
referred to as "radio module") is designed for domestic
use or similar.
The retrofittable radio module can be used as part of a
bi-directional radio communication network together
with various other devices interconnected in groups.
In the event of fire, an alarm is triggered by all radio
modules/D 110 smoke detectors that are interconnected
by radio. Both alarm signals and fault signals are relayed.
For instance, this means that if there is a device with a
flat battery in a rarely used room, the signal can also be
detected in other rooms.
GB
111