Solamagic 500 W Montage- Und Gebrauchsanleitung Seite 102

3. For radiant heaters with pivoting hinges
• Determine the appropriate mounting sepa-
ration of the pivoting hinges on the heater.
• Secure the ceiling plates at the selected
separation using suitable fasteners on the
wall/ ceiling.
ATTENTION!
With ceiling mounting the supplied insu-
lating washers must be installed between
ceiling and ceiling plate.
• Tighten the hinges on the t-nuts until they
can no longer move relative to the heater,
tighten the M3 grub screws.
• Adjust the hinges until the desired tilting di-
rection is achieved.
• Position and tighten the M5 grub screws in
the ceiling plates.
08/2016
102