Totally Wicked AIO Slider Hellfire Bedienungsanleitung Seite 6

Using your aio Slider Hellfire
Filling with E-liquid:
Sliding Cap
To fill the device, slide the upper
section of the top cap to the side
by pushing firmly sideways, this will
expose the filling hole. The correct
sliding direction is clearly indicated.
Insert the e-liquid filling nozzle into
the fill hole and slowly fill the tank
with e-liquid, being careful not to
overfill.
Note: When filling, ensure that the
tank is not entirely filled and an
air gap of 2mm remains above the
e-liquid to ensure proper e-liquid
6
supply to the wick.