Axis M1143-L Installationsanleitung Seite 9

AXIS M1143-L/M1144-L
AXIS IP Utility - single camera/small installation
AXIS IP Utility
automatically
discovers and displays
Axis devices on your
network. You can also
manually set a static IP
address through this application. AXIS IP Utility is available on the Axis
Network Video Product CD, or it can be downloaded from www.axis.com/
techsup
Install the AXIS M1143-L/M1144-L Network Camera on the same
network segment (physical subnet) as the computer running AXIS IP
Utility.
Automatic discovery
1. Check that the AXIS M1143-L/M1144-L Network Camera is
connected to the network and that power has been applied.
2. Start AXIS IP Utility.
3. When the AXIS M1143-L/M1144-L network camera appears in the
window, double-click to open the camera's home page.
4. See page 11 for instructions on how to set the password.
Set the IP address manually (optional)
1. Acquire an unused IP address on the same network segment your
computer is connected to.
2. Select the AXIS M1143-L/M1144-L in the list.
3. Click the button
enter the IP address.
Click the Assign button and follow on-screen instructions. Note
4.
that the camera must be restarted within two minutes for the new
IP address to be set.
Click the Home Page button to access the camera's web pages.
5.
Assign new IP address to selected device and
Page 9