Battery Replacement - Axis M1143-L Installationsanleitung

Safeguards
Please read through this Installation Guide carefully before installing the product.
Keep the Installation Guide for further reference.
CAUTION!
• When transporting the Axis product, use the original packaging or equivalent
to prevent damage to the product.
• Store the Axis product in a dry and ventilated environment.
• Avoid exposing the Axis product to vibration, shocks or heavy pressure and do
not install the camera on unstable brackets, unstable or vibrating surfaces or
walls, since this could cause damage to the product.
• Only use hand tools when installing the Axis product, the use of electrical
tools or excessive force could cause damage to the product.
• Do not use chemicals, caustic agents, or aerosol cleaners. Use a damp cloth
for cleaning.
• Use only accessories that comply with technical specification of the product.
These can be provided by Axis or a third party.
• Use only spare parts provided by or recommended by Axis.
• Do not attempt to repair the product by yourself, contact Axis or your Axis
reseller for service matters.
IMPORTANT!
• This Axis product must be used in compliance with local laws and regulations.

Battery replacement

This Axis product uses a 3.0V CR2032 Lithium battery as the power supply for its
internal real-time clock (RTC). Under normal conditions this battery will last for a
minimum of 5 years. Low battery power affects the operation of the RTC, causing it
to reset at every power-up. A log message will appear when the battery needs
replacing. The battery should not be replaced unless required!
If the battery does need replacing, please contact www.axis.com/techsup for
assistance.
• Danger of Explosion if battery is incorrectly replaced.
• Replace only with the same or equivalent battery, as recommended by the
manufacturer.
• Dispose of used batteries according to the manufacturer's instructions.