Buttons And Functions - CO/Tech 36-6035 Original Bedienungsanleitung

Buttons and functions

Power switch
Switch the heater on and off.
Thermostat knob
1. Max
2. Min
Operating instructions
1. Plug the mains lead into a wall socket.
2. Switch the panel heater on.
3. Turn the thermostat knob to max.
4. Wait until the room has reached the desired temperature.
5. Turn the knob back the other way until the panel heater switches off.
6. The panel heater will now start heating automatically when the temperature in
the room drops below this setting and stop heating once the set temperature has
been reached.
Overheating protection
The heater is fitted with an over-temperature safety cut-off which switches the heater
off if it overheats.
To reset the over-temperature safety cut-off switch, unplug the heater and let it cool.
Plug the mains lead back in and switch the panel heater on again. The appliance
should now function normally again.
1
2
5