Operating Determinations - Omnitronic ADI-OO4M Bedienungsanleitung

Never put any liquids on the device or close to it. Should any liquid enter the device nevertheless, let the
device be checked by a qualified service technician before you operate it again. Any damages caused by
liquids having entered the device are not subject to warranty!
This device falls under protection-class III.
Please note that damages caused by manual modifications on the device or unauthorized operation by
unqualified persons are not subject to warranty.
Keep away children and amateurs from the device!
Batteries are hazardous waste which need to be disposed of appropriately. If the device is to be disposed,
the batteries have to be removed first. Make sure that the poles are correct when inserting the battery. Never
let batteries lying around openly as there is the danger that these can be swallowed by children or domestic
animals. Immediately consult a doctor when batteries are swallowed! Leaking or damaged batteries can
cause irritations when getting into contact with the skin. In this case use appropriate protective gloves. Make
sure that the batteries cannot be short-circuited, thrown into the fire and be charged. There is a danger of
explosion. Never spill any liquids on the device. Should any liquid enter the device nevertheless, remove the
batteries immediately. Please let the device be checked by a qualified service technician before you operate
it again. Any damages caused by liquids having entered the device are not subject to warranty!

3. OPERATING DETERMINATIONS

The ADI-004M USB audio interface was designed as an audio interface between analog and digital audio
sources, recorders and a computer with USB 1.1 or 2.0 connection. It is suitable for use on stage and in the
sound recording studio as well as for home recording and multi-media applications. Microphone signals,
high-impedance instrument signals, analog line signals and digital signals can be transmitted with superior
sound quality to a computer where they can be edited, mixed and published with corresponding production
software. The audio interface is compatible to PC and Mac and requires no setup thanks to its plug & play
functionality.
The interface features two combo inputs for microphones and high-impedance music instruments, an input
for units with line level (e.g. CD players) as well as an input for digital audio signals. For the analog inputs
the amplification can be adjusted and for phantom-powered microphones +48 V phantom power can be
switched on.
The audio signals coming from the computer and the preamplified analog input signals are available at two
6.3 mm jacks as well as at an adjustable 3.5 mm headphones output. Additionally, there is a digital output for
the audio signals coming from the computer. The power supply for the unit is made via the USB interface.
Alternatively the supplied power unit or the 9 V battery may be used for an operation independent of the
computer.
This product is allowed to be operated with 9 V AC/DC, 150 mA and was designed for indoor use only.
Do not shake the device. Avoid brute force when installing or operating the device.
When choosing the installation spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. There should not be any cables lying around. You endanger your own and the safety of
others!
The ambient temperature must always be between -5° C and +45° C. Keep away from direct insulation
(particularly in cars) and heaters.
The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
This device must only be operated in an altitude between -20 and 2000 m over NN.
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation!
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
13/19 00049771.DOC, Version 1.0