Maintenance And Cleaning; Technical Data - Renkforce 1346300 Bedienungsanleitung

Partitioning/formatting the hard disk drive
• If you want to use a hard disk drive that has not been used before, it must be
partitioned and formatted before it appears in the file manager of your operating
system and can be used as a disk drive. For formatting, refer to the instructions for
the operating system that you are using.
• In Windows you can partition and format the hard disk drive via the Control Panel.
®
For example, in Windows 7 you can partition and format the hard disk drive in
®
"System and Security" under Control Panel. Click on "Administrative Tools" and then
on "Create and format hard disk partitions". Select the correct hard disk drive and
create a new partition.
• Then format the newly created partition. A quick format is sufficient. Depending
on the capacity of the hard disk drive, a regular format may take a long time to
complete.
• Consult an expert if you are unsure about partitioning/formatting the hard disk drive.
Tips and important information
a) USB 3.0
• Your computer must support the USB 3.0 standard in order to be able to use USB 3.0
speeds.
• If you are connecting the product to a USB hub, the USB hub must support the
USB 3.0 standard in order to provide the maximum transfer speed (max. 5 Gbps).
b) General information
• Before turning the product off, eject the hard disk drive from your computer to avoid
data loss. Refer to the documentation from the operating system manufacturer.
• The product recognises when the computer is turned on/off and turns itself on/
off accordingly. When the computer is turned off or placed in hibernation mode,
the inserted hard drive turns itself off along with the LED indicator on the product.
On some operating systems, only the monitor and connected peripheral devices
are turned off when the computer is placed in hibernation mode; the mainboard
continues to be supplied with a current. If so, the inserted hard disk drive and the
LED indicator do not turn off.
• Note that files may be damaged and the operating system may crash if the
connection cable is disconnected when data is being transferred. Always unmount
the hard disk drive via the operating system before disconnecting the connection
cable.
• Always handle hard disk drives carefully.
• When connecting the hard disk drive for the first time, it may take approximately
one minute until the hard disk drive is recognised. This time may vary depending on
the operating system.

Maintenance and cleaning

Never use aggressive and abrasive detergents, rubbing alcohol or other
chemical solutions, as these could damage the housing or even impair
the functioning of the product.
• You do not need to carry out maintenance work on the product.
• Disconnect the USB cable from the product before cleaning.
• Do not immerse the product in water.
• A dry, soft and clean antistatic cloth is sufficient for cleaning the exterior. Do not
press too hard on the housing as this can lead to scratch marks.
• Dust can be easily removed using a soft and clean long-haired brush.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste.
At the end of its service life, dispose of the product according to the
relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the
environment.

Technical data

USB standard.......................................USB 3.0
Power supply .......................................5 V/DC via USB
Suitable for ...........................................SSD hard disk drive with 3.5 mm height
Supported operating systems ........... Windows
Operating conditions ..........................-10 to +60 °C, 10 - 90 % RH
Storage conditions..............................-10 to +45 °C, 5 - 95 % RH
Dimensions (W x H x D)......................70 x 10 x 40 mm
Weight ...................................................26 g (housing and cable)
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the
technical status at the time of printing.
© Copyright 2015 by Conrad Electronic SE.
2000, XP (Home, Pro, with SP1, SP2,
®
SP3, 32-bit only), Vista™ (32/64-bit),
7 (32/64-bit), 8, 8.1 (32/64-bit),
Mac OS X 10.3, 10.7.4, Red Hat Linux,
Linux Fedora FC8
V1_0715_02-DS