Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• Then format the newly created partition. A quick format is sufficient. Depending on the
capacity of the hard disk drive, a regular format may take a long time to complete.
• Consult a technician if you are unsure about partitioning/formatting the hard disk drive.
Tips and important information
a) USB 3.0
• Your computer must support the USB 3.0 standard in order to achieve USB 3.0 speeds.
• If you are connecting the product to a USB hub, the USB hub must support the USB 3.0
standard in order to provide the maximum transfer speed (max. 5 Gb/s).
a) General information
• Before disconnecting the product, eject the hard disk drive from your computer to avoid data
loss. Refer to the documentation from the operating system manufacturer.
• The product recognises when the computer is turned on/off and turns itself on/off accordingly.
When the computer is turned off or placed in hibernation mode, the inserted hard disk drive
turns itself off along with the LED indicator. On some operating systems, only the monitor
and connected peripheral devices are turned off when the computer is placed in hibernation
mode; the mainboard continues to be supplied with a current. If so, the inserted hard disk
drive and the LED indicator do not turn off.
• Note that files may be damaged and the operating system may crash if the connection cable
is disconnected when data is being transferred. Always unmount the hard disk drive via the
operating system before disconnecting the connection cable.
• Always handle hard disk drives carefully. Vibrations during use and even a few seconds after
the hard disk drive has turned off may cause the read/write heads to touch the magnetic disk,
which can destroy the hard disk drive.
• When connecting the hard disk drive for the first time, it may take approximately one minute
for the hard disk drive to be recognised. This time may vary depending on the operating
system.
Care and cleaning
• Wait at least 30 seconds until the magnetic plates on the hard disk drive have come to a
complete standstill.
• Do not immerse the product in water.
• Always disconnect the product from the power supply before cleaning it. Disconnect the USB
cable from the product before cleaning.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these could
damage the casing or even impair the functioning of the product.
• Use a dry, lint-free cloth to clean the product. Do not press too hard on the housing, as this
can lead to scratch marks.
• Dust can be easily removed using a soft and clean long-haired brush.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household
waste. At the end of its service life, dispose of the product according to the relevant
statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
Power supply ................................ 5 V/DC via USB 3.0, max. 900 mA
USB standard ............................... USB 3.0
Hard disk drive (SATA) ................. Size: 6.35 cm (2.5")
Suitable for ................................... 6.35 cm/2.5" HDD/SSD hard drive with 9.5/12.7 mm height
Supported operating systems ....... Windows
32-bit only), Vista™ (32/64-bit), 7 (32/64-bit),
8 & 8.1 (32/64-bit), 10.0 (32/64-bit), RT
Operating conditions ..................... -10 to +50 °C, 0 - 95 % RH
Storage conditions ........................ -10 to +50 °C, 0 - 95 % RH
Dimensions (W x H x D) ............... 76 x 14 x120 mm
Weight .......................................... 58 g
2000, XP (Home, Pro, with SP1, SP2, SP3,
®
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2016 by Conrad Electronic SE.
*1428144_1428142_1428140_v1_0416_02_DS_m_4L_(1)
Werbung
Inhaltsverzeichnis
