Maintenance - Starmix NSG uClean LD-1445 Bedienungsanleitung

en
Transport and storage
1. Before transport, close the locks on the upper part of the vacuum cleaner.
2. Pay atenion to the weight of the vacuum cleaner, paricularly if the dirt container is full.
3. Do not ilt the vacuum cleaner if there is liquid in the dirt container.
4. Store the vacuum cleaner dry and indoors, protected from frost.
4 Troubleshooing and repair
Fault
Sucion power drops
Vacuum cleaner does not start
Vacuum cleaner does not start
when the electrical tool is
switched on
Do not try anything else, contact customer services.

5 Maintenance

See Fig. G-H-I-J.
When maintaining and cleaning the vacuum cleaner, handle it in such a way that there is no danger for mainte-
nance personnel and other people.
Only for vacuum cleaners in dust class L
For maintenance by the user, the vacuum cleaner must be
– dismantled,
– cleaned and
– maintained,
as far as possible without creaing any danger to the maintenance personnel or other.
Suitable precauionary measures include
– Cleaning before dismantling,
16
Cause
Lid not properly closed
Filter dirty
Filter bag full
Container full
Motor protecion ilter blocked
Nozzle, tube or hose blocked
Mains plug not in socket
No mains voltage
Mains connecion cable defecive
Water sensor/loater has switched
of
Switch in posiion A
Electrical tool not plugged into
socket on the vacuum cleaner
Switch not in posiion A
Remedy
Close lid
Clean
Change
Empty
Clean
Clean
Plug in
Check fuse
Have it replaced
Empty container
Move switch to I
Plug mains plug into socket on the
vacuum cleaner
Move switch to A