Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. Press the PROGRAM button (14) on the unit . The following information will be
displayed on
the Display.
2. Press the Forward and Reverse Skip Track buttons (18,19) on the unit to select
the track to be stored in location i.e. track 03).
3. Press the PROGRAM button. The first program selection is now stored in the
program memory.
DISPLAY PLAY in USB / CARD
In MP3/WMA mode ,When playing press the Display button (6) by remote , To active
file/folder name search function.
DELETE in USB / CARD
When delete the file, press the DELETE button(11) by remote, Then press the SKIP
+/- button to select.
And press the RECORD button to confirm.
Listening to Programmed Tracks
Press the Play Pause button. Disc play will start at the beginning of the first
programmed track .
To Clear The Program Memory
If the disc is playing, press the Stop button to stop the disc.
Select TUNER or PHONO to clear the Program.
ENCODING AND STORING FROM PHONO.
You can encode you favorite EP songs into mp3 format and store then into
your memory
device through the USB port or SD/MMC card slot.
1. Set the Function Selector (12) on the PHONO position
2. Select the track no. to be encoded.
3. Press the Record button to start sync encoding and the display will show "USB or
CARD" flash.
4. Press the SKIP +/- button(15,16) to select recording into USB or Card drive.
5. Press the Record button(14) or STOP/CD/USB/SD button(16) to stop encoding
COPYING FROM MP3 DISC
You can copy the files and store then into your memory device through the USB
port or SD/MMC card slot.
1. Insert the USB and Card device, press the RECORD button to copy.
2. Press the encoding button to start copy the files and the display will show "CHE "
"COPY USB/CARD" flash.
3. Press the Record button(17) or STOP/CD/USB/SD button(16) to stop encoding.
BASS BOOST
Press the Bass boost button once (13 )to ON position to enjoy a more powerful
Bass sound.
REMOTE CONTROL UNIT
PREPARATION BEFORE USE
1.Remove the battery cover from the back of the remote control unit.
2.Insert a CR2032 (3V) size battery (included). Insert the battery with the + and -
terminals matching the indication inside the battery compartment.
.
Werbung
Inhaltsverzeichnis
