Herunterladen Inhalt Inhalt Diese Seite drucken

Reflexion TTR-8642UCE Bedienungsanleitung Seite 15

Plattenspieler mit am/fm radio, usbanschluss, sd-kartenslot und encoding–funktion turntable player with stereo radio, usb-/sd-slot and encodingfunction
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

FM Stereo and Mono Reception
When an FM signal is tuned in, stetting the Band selector (11) to FM ST. position will
enable
the broadcasting to be received in stereo sound. The FM Stereo indicator will appear on
dial pointer.
TURNTABLE OPERATION
Preparation
Open the Record Player Cover.
Release the Tone arm Clamp, and remove the stylus protector.
Listening to Records
1. Set the Function Selector (12) to the PHONO position.
2. Place a record on the turntable, over the central spindle. Place the EP adapter over
the
central spindle when playing 17cm EP records.
3. Set the Speed Selector (5) to 33 or 45 or 78 rpm according to the record.
4. Release the tone m clamp, and remove the protective cap from the stylus.
5. Lift the Tone arm with the Tone arm Lift Lever.
6. Move the tone arm to the beginning of the record, or to the start of a particular track.
7. Gently lower the tone arm onto the record with the Tone arm Lift lever to start playing.
8. When the record is finished the tone arm will automatically stop. Lift the tone arm
from
the record and return it to the rest .
9. To stop manually, lift the tone arm from the record and return it to the rest.
10. Set the Function Selector (27) ,Turn switch to ON for turntable non-stop.
Notes: Do not stop or turn the platter manually.
Moving or jarring the turntable without securing the Tone arm clamp could
result in damage
to the Tone arm.
Replace the protective cap on the stylus when not in use.
Aux Line-Out Output
Line out output (For Aux Amplifier connection)
You can connect the unit to external speakers (4 OHM) by connecting the
speaker output socket L, R to your external speakers (Not included).
Note: The sound from the original built-in speakers will still be heard even after
connecting the external speakers
HEADPHONE
This unit will accept stereo headphones (not included) with a 3.5mm plug
and an impedance
of 8 ohms or greater. The speaker are automatically disconnected when
headphones are
connected to the PHONES JACK (21).

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis