Cleaning And Maintenance - Combi 623514440101 Gebrauchsanleitung

ENG
LIGHTING WITH LIGHTER FLUID
• Pour on the lighter fluid as instructed on the bottle.
• Light the briquettes/charcoal with the barbecue lid removed. Be careful of the flames.
• Wait until the briquettes/charcoal have an even glow and a grey film before barbecuing.

CLEANING AND MAINTENANCE

• Let the barbecue/barbecue parts cool completely before cleaning them.
• Make sure the fuel supply on the gas cylinder is closed.
• The barbecue must be thoroughly cleaned regularly. If the barbecue is used in
excessively corrosive environments, such as by the sea, it is extra important that the
barbecue be cleaned often. Salt and moisture usually break down the barbecue's
protective outer surface, which can lead to surface rust.
CLEANING THE OUTSIDE OF THE BARBECUE
• Wipe the outside of the barbecue with a soft sponge, a mild soap and water. Rinse
with clean water and let it dry. Do not use abrasive cleaners.
• If there are any scratches/damage on the lacquer, it must be treated immediately to make
sure it does not start to rust. Treat any scratches/damage on the lacquer by first rub away
any rust and removing any paint flakes with a wire brush. Then paint with rust protection
paint for metal in the relevant colour. Always follow the instructions on the paint tin.
CLEANING THE COOKING GRATES
• Do not use sharp objects to clean the cooking grates, since its surface can be damaged.
• It is not necessary to clean the cooking grates after each use. Let the barbecue burn
at max power for about 5 minutes after grilling is finished and then remove the resi-
due with a brush. Then wipe with paper towels.
• However, the cooking grates must occasionally be carefully cleaned. Use mild soap
and water. Rinse with clean water and let it dry.
• Before grilling, you can oil the cooking grate with cooking oil so that the grill items do
not stick.
CLEANING THE INSIDE OF THE GAS BARBECUE
• Wipe the barbecue with a mild soap and water. Rinse with clean water and let it dry.
Do not use abrasive cleaners or oven cleaners.
CLEANING THE BURNERS
1. Remove the cooking grates and the heat diffusers.
2. Clean the burners with a soft brush or blow it clean with compressed air. Wipe with a cloth.
3. Carefully clean the clogged openings with pipe cleaners and stiff wire (such as an
open paper clip).
4. Make sure there is no damage to the burners (cracks or holes). Replace the burner if
damage is found.
5. Reinstall the burners and make sure the gas valve's mouth piece is firmly in the right
position in the burner tube.
6