Intended Use; Operation; Before First Use - Westfalia 84 25 50 Bedienungsanleitung

Intended Use

 The multi hand pump has been designed for extracting and
transferring liquids, such as water, gasoline, frost protection
agent, etc. from one container to another. The pump must not
be used for drawing or transferring of food or other materials.
 The intended use also includes an operation following the
operating instructions.
 Any use beyond these parameters (different media, applying
force) or any changes (reconstruction, no original accessory)
can lead to serious risks and is regarded as use that is contra-
ry to the intended purpose.

Before first Use

Remove all parts of the transfer hand pump out of the packaging
and check them for damage in transit. Keep packaging materials
out of reach of children. There is a risk of suffocation.

Operation

1. Slide the plastic sleeve (9) over one of the ends of each hose
and insert the plastic reinforcing pieces (8) into these ends.
For the oil hose use the included adapter piece (10).
2. Insert the reinforced end of the intake hose into the intake port
(2) of the pump and secure the connection with the sleeve.
3. Insert the reinforced end of the discharge hose into the
discharge port (11) of the pump and secure the connection
with the sleeve.
4. Make sure the hose connections are tightly connected. Before
each use check the whole system for leakages.
5. Insert the free end of the intake hose into the container or tank
you want to extract fluids from. Feed the hose in until if bot-
toms up in the container.
6. Insert the discharge hose into the target container. Make sure
Operation
7