Intended Use; Unpacking The Tool; Before Use; Pressure Hose And Adapter - Westfalia ALP18 Originalanleitung

Intended Use

Versatile compressor pump for
.
leisure items

Unpacking the Tool

▪ Carefully unpack and inspect your cordless inflator. Familiarise
yourself with all its features and functions.
▪ Ensure that all parts of the tool are present and in good condition. If
any parts are missing or damaged, have such parts replaced before
attempting to use this tool.

Before Use

Please note that that battery and charger are not included with the
tool.
Removing a Battery from the Tool
To remove the battery from the tool, press the battery release button,
then slide the battery off the hand grip.
WARNING: Do not try to remove the battery without pressing the
battery release button. The inflator or battery could be damaged.
Fitting a Battery
To fit a charged battery, slide it on to the hand grip of the inflator until it
clicks and locks into position.
Note: Make sure the battery and inflator are lined up correctly. If the
battery does not slide into the tool easily, don't force it. Instead, slide
the battery out of the tool again, check the top of battery and the inflator
battery slot are clean and undamaged and that the contacts are not
bent.

Pressure Hose and Adapter

The head of the pressure hose is equipped with a valve chuck. Set the
head onto the valve with the clamping handle folded out and fold the
lever down onto the hose to clamp the adaptor tight to the valve..
Without the adapter the chuck will fit a regular automotive or Schrader
valve. An adapter for Dunlop, Presta and Sclaverant valves, a ball
Operation
filling Car and bicycle tyres, balls and other
14