Product Description - Klarstein 10020774 Handbuch

• Do not wash main motor and power plug with water or other liquid. Only wipe them with damp cloth.
• Don't remove the cup lid during operation. Don't put the hand or other vessel into blender cup and feeding
hole when power is still on. Otherwise accident or damage will happen.
• This product must not be idle nor exceed the requirement in processed amount (normally, less than 60
percent would be best). Otherwise, bearings of motor and blade will overheat.
• Blades are very sharp. In order to avoid injury, when washing blades, please put them under water tap to
wash. Do not wash them with hand.
• Please don't leave when the machine is working. Don't let children operate the machine.
• Remove power plug and then pour out the food after every operation.
• Do not put any parts into high temperature sterilizer to sterilize or boiler to steam and boil for sterilization.
• The machine is not recommended for other usage.
• In order to prolong useful life of the machine, there is overheat protecting unit on motor. When motor runs
too long or with too heavy load, the temperature reaches warning value, motor will stop automatically. After
motor stops, pull out power supply plug. Wait for motor to cool (about 20 to 30 minutes), then use again.
• If power supply flexible cord is damaged, to avoid danger, do ask factory, its service department or other
special person to replace.
• If any problem with this machine, do not disassemble by yourself, contact the service department.
1 Feeding cover
2 Spatula
3 Lid
4 Blender jar
5 Blending knife
6 Blending knife stand
7 Main machine
7

Product Description