tepro Danville Bedienungsanleitung Seite 29

5. Set the grill grate onto the grill trough.
Also pay attention to the cooking
times.
6. Connect the mains plug (7) to a
suitable socket.
7. The appliance should be heated for
approx. 10 - 15 min before the start of
grilling.
8. Turn the On/Off switch and
temperature controller 0-MAX (6) to
MAX. The pilot lamp (15) lights up
and at the same time the heating
element is heated.
9. Now the food can be placed onto the
grill grate. Frozen food should be
defrosted completely before grilling.
10. The drip pan (8) catches dripping fat
and gravy. Never use the grill without
a drip pan.
11. The handles (9) of the grill are
heat-insulated. However, as the grill
becomes very hot, it is recommended
that you use heat-resistant kitchen
gloves or pot holders.
12. Use long-handled cutlery for placing
the food.
13. The food should be turned over
several times during the grilling for
uniform grilling. The grilling time
depends on the type of food.
GB
14. You can adjust the temperature with
the temperature control settings 0 -
MAX (just above 0 = low temperature,
MAX = very high temperature). The
pilot lamp goes out as soon as the set
temperature has been reached.
15. CAUTION! To avoid heat build-up, do
not place aluminum foil or other
grilling utensils onto the grill grate.
16. Risk of burns! If the grill must be
moved when hot for any reason, only
hold the grill with the heat-insulated
handles (9) and move it slowly.
17 To switch the grill off, turn the
temperature control 0 –MAX to 0 and
disconnect the mains plug (7) from
the socket.
18. Let the appliance cool down for
approx. 20 min before moving it.
19. The grill griddle (3) and the
temperature control (5) may be
removed only after the appliance has
cooled down completely.
29