Appendix; Settings Menu - Bellman & Symfon Audio Domino BE2230 Bedienungsanleitung

Appendix

Settings
Bellman Audio Domino has more settings than those you can access in user
mode. By going into the Settings Menu you can adjust settings that you do not
normally need to change or which are adjusted when first used and never need
to be changed again.
290

Settings menu

Start the Receiver Unit with the On/Off button i (6).
Hold down the On/Off button i (6) and press the Vol-
ume Button - (10) within 1 second until the RF LED
(4) starts to blink. When the RF LED (4) starts to blink,
you can release both the buttons.
Press the R button (7) within 2 seconds of the mo-
ment the RF LED (4) starts to blink and hold down the
button until the RF LED (4) goes out. Release the R
button (7) immediately when the RF LED (4) has gone
out.
You are now in Balance Control mode.