ZyXEL NWA-3100 Kurzanleitung Seite 5

2.1 Set Up Your Computer's IP Address
You must first set your computer to use a static IP address in the 192.168.1.3 -
192.168.1.254 range with a subnet mask of 255.255.255.0. This ensures that your
computer can communicate with your NWA-3100.
The following instructions are for the Windows 2000, Windows NT and Windows XP
operating systems.
1 In Windows XP, click Start > Control Panel.
In Windows 2000/NT, click Start > Settings > Control Panel.
2 In Windows XP, click Network Connections.
In Windows 2000/NT, click Network and Dial-up Connections.
3 Right-click Local Area Connection and then click Properties.
4 Select Internet Protocol (TCP/IP) (under the General tab in Windows XP) and click
Properties.
5 The Internet Protocol TCP/IP Properties screen opens (the General tab in Windows
XP).
6 Select Use the following IP address and fill in the IP address (choose one in the
range 192.168.1.3 - 192.168.1.254), Subnet mask (255.255.255.0), and Default
gateway (192.168.1.2) fields.
7 Click OK to close the Internet Protocol (TCP/IP) Properties window.
8 Click Close (OK in Windows 2000/NT) to close the Local Area Connection
Properties window.
ENGLISH
4