Leak Tests - IKEA Klasen Gebrauchsanleitung

Do not use petrol, white spirit, lighter
fluid, alcohol or other similar chemicals
to ignite a barbecue.
When storing the barbecue or gas
cylinder, ensure they are away from
flammable materials or liquids.
The gas cylinder must not be stored
next to this or any other appliance.
Always follow care and maintenance
instructions – regularly maintain your
barbecue.
Do not allow grease, fat or food residue
to build up in or on the barbecue – RISK
OF FIRE.
Always replace worn parts – do not use
the barbecue if a leak, wear or damage
is found.
Never overload the grill with food
– evenly space over the cooking
grill surface, ensuring sufficient air
circulation to the burners.
Do not store or cover the barbecue until
fully cooled.
This product is not suitable for lava
rocks.
Do not obstruct the flow of combustion
and ventilation air.
Keep the ventilation opening of the
cylinder enclosure free and clear from
debris.
Keep the area around your gas barbecue
clear of any combustible materials,
petrol or other flammable liquids and
vapours.
Pressure regulator and hose assembly
supplied with this barbecue must be
used.
Replacement pressure regulators and
hose assemblies must be the same
as those supplied originally with the
barbecue. Never use an adjustable
regulator with this barbecue.
Do not hang any combustible materials
from the hand rails of this barbecue.
Accessible parts may be very hot. Keep
young children away.
Always wear protective gloves or a
barbecue mitt when handling hot
components or items such as pots.
Before each use inspect the gas hose
to ensure it is free of any twisting or
tension.

LEAK TESTS

IMPORTANT – PERFORM LEAK TESTS
BEFORE USE
Always leak test the unit – annually, when
dismantled, when parts are replaced, or if
the gas cylinder is removed or replaced.
• Never use an open flame to check for
leaks at anytime. DO NOT IGNITE THE
BARBECUE DURING LEAK TESTING.
• To be performed in a well-ventilated area.
• Be sure all control knobs are in the 'OFF'
position.
• Check for leaks by brushing a solution
of 1/2 water and 1/2 soap over all the
gas system joints, including all valve
connections, hose connections and
regulator connections.
• Ensure the soap solution has been applied
to all connections – connect the regulator
to the gas cylinder, open the gas control
valve on the regulator allowing gas to
flow.
• OBSERVE – if bubbles form over any part
of the joints there is a leak.
• Turn off the gas and tighten all joints
• Repeat test. If bubbles form again, do not
use the barbecue. Please contact your
local dealer for assistance.
GAS AND REGULATOR INSTRUCTIONS
• This barbecue can use either propane or
butane LPG bottled gas. If using butane
you must change the regulator.
• Propane cylinders will supply gas all year
round, even on cold winter days.
• Butane cylinders will supply sufficient gas
in summer. Butane gas must not be used
in colder temperatures. Contact your local
gas supplier for advice.
• The cylinder should be positioned
underneath the main barbecue body and
stored upright.
• Gas cylinders should never be stored or
laid on their side.
User Instructions
Before assembling your barbecue, remove
all protective packaging from each part.
The gas cylinder must have a connection
compatible with the regulator supplied with
the barbecue and have a minimum capacity
of 4kg / 9lbs.
6